Care & Maintenance - Patio Time

Aluminum

Aluminum patio furniture is remarkable for the metal’s low weight and its ability to resist corrosion, and its nature which is lasting for a long time and standing up to all weather conditions has impressed people. Our aluminum patio furniture is made from great quality aluminum for guaranteed strength and solidity. You also don’t have to worry about sacrificing style for durability to be mentioned.Before cleaning your aluminum surfaces make sure the furniture is not hot from sun exposure.

Do not use abrasive materials, cleaners, or bleach products on frames.
Do not pull or push the furniture to avoid any damage to the floor, legs, and frame.
Do use covers to protect the furniture or store it indoors.
Tighten up screws, nuts, and nut caps after using them for a while.

Remove the cushions from the furniture.
Prepare water and mild detergent solution.
Spray the solution on the dirty area.
Use a soft and dry cloth or a sponge to clean the surface.
Rinse with clean water and allow the furniture air-dry completely before replacing cushions.
Tighten up bolts, and nut caps after using them for a while.

Wicker/Rattan

Wicker/Rattan outdoor furniture has been one of the hottest trends in outdoor decoration and design. Our wicker/rattan gets woven into its beautiful detail to complete its look. Wicker/Rattan furniture can be either natural or synthetic which is commonly used in the summer month. To obtain a longer service life of it, proper cleaning regularly is a need. Make sure the furniture is completely dry before covering or storing it.

Do not use a solvent-type solution.
Do not cut directly on the surface.
Do not use abrasive cleaners.

Remove dirt particles with a soft cloth or sponge.
Wipe down the furniture with a solution of warm water and mild detergent.
Rinse it with clean water.
Allow it to air-dry thoroughly.

Cushions

Our cushions do have zippers, however the zippers are for production use only and we extremely do not recommend removing the cover from the fill. The cushions are not waterproof but water repellent. This means light rain will bead off the cushion surface, but under intense rain, the water will find its way into the pillow.

Do not remove covers from the fill.
Do not submerge cushions in water.
Do not bleach to clean.
Avoid direct contact with the sun for a long time.
Do not put cushions in the dryer.
Avoid using abrasive cleaners or hard bristle brushes.

Choose a beautiful sunny day in your yard
Use a sponge, clean towel or soft scrub brush with warm soapy water solution to clean the cushion.
Gently scrub and wipe until the cushion is clean.
Rinse the area with a clean damp sponge to remove all soap residue andavoid water spots.
Hang outside to air dry until the cushion is completely dry.

Slides

The slides refer to the hardware connecting parts fixed on the cabinet body of the fire pit to extend smoothly and close quietly. Our slides are made with an all-steel construction with high precision hardened steel ball bearings. Slides are zinc plated for corrosion resistance under proper care. Therefore, we recommend keeping the fire pit table in a dry environment to extend the service life of the slides.

Do not expose it in a wet environment.
Do keep dust and moisture away.

Keep it dry.
Mix baking soda and vinegar to remove the spots.
Clean with tissue softly.
Grease the slides if necessary.

Ceramic Tabletop

Ceramic tabletop owns a beautiful and elegant appearance which is made from denser porcelain clays and finer-grained clay making them stronger. Our ceramic tabletops have a low water absorption which makes them frost resistant.

Do not use abrasive cleaners to damage the surface.
Do not punch the tabletop with heavy objects.
Do not remain the soap residue on the tabletop.

Remove all stuff on the tabletop.
Clean with a mild liquid soap, water, and a clean soft rag.
Use PH-balanced cleaner to remove tougher stains.
Rinse with the clean water.
Make sure all the soap residue is removed.

Teak

Teak wood can add a sense of design and fashion to your furniture. Meanwhile, enhancing experience feeling is available with teak wood. It is important to note that teak wood will change color from golden to silvery gray patina over time, in other words, if you leave it untreated, it will weather to a gray hue. So the care and maintenance of the teak require attention.

Remove all cushions before the cleaning.
Wet your teak furniture.
Use a sponge or scrub brush to clean the surface.
Hose it down with clean water.
Allow it to air-dry.

Keep the teak clean, dry, and dust-free.
Allow it to air-dry completely.
Choose a sealing product, the water-based sealer is our recommendation.
Shake the sealer and mix it fully.
Apply twice thinly with a soft cloth and wipe off the drips lightly.
Wait for the fully dry.
Repeat this process if you are unsatisfied with the color.

Sintered stone Tabletop

Spills on the table should be cleaned up as they occur since over time the offending matter can penetrate the sealant and cause damage. Avoid ammonia-based cleaners on stone tables as they can cause premature breakdown of the table sealant.

Do not use steel wool or other abrasive cleaners.
Do not hit the tabletop with heavy objects.
Do not expose it to nail polish or acetone.
Avoid ammonia-based cleaners.

Remove all stuff on the tabletop.
Brush off any dirt and debris on the surface with a soft brush.
Clean with a mild detergent and clean water.
Rinse it thoroughly.
Dry with a soft cloth or towel.

Hardware

Hardware accessories refer to a tool to assist in installation as an accessory product for furniture. You can use it reasonably by following the installation steps. Otherwise, please pay attention to maintenance and storage if you do not use them temporarily.

Do not expose the hardware in a watery place.
Do not submerge it in water.

Put the hardware in the shade and dry environment.
Use a soft cloth to keep it clean.
Dry water stains in time to prevent rust.